Give a girl the right shoes, and she can conquer the world



Or, at least a regional 3rd at the Crown Championships of Cosplay. For Marie Antoinette, I actually ended up making about four different pairs of shoes on the way to the final product that I used at the competition. I had never made a full pair of shoes before until last summer, only shoe covers, etc. My dream had been to make “real” shoes, with wooden heels and all that, but there comes a point where you have to focus your priorities and while shoes were important, finishing out the actual gown to the highest standard took precedence. BUT, I still wanted Cinderella shoes for this.

The first pair was a complete trial-and-error situation. I patterned them from scratch, using heavy felt for my pattern to mimic the structure of the final shoe. It was weird, there are so many tucks and curves in shoemaking that you don’t realize are important until you make them yourself. The first version got thrown out pretty quickly, the second version is what came to DragonCon with me. These were pretty basic, with a vinyl sole, felt lining, and silver lame outer. The pointed toe was a little more compicated to get right than I expected, and involved lots of re-cutting of the pattern to get the point to fall in the exact spot it needed too. These were embellished with gold sequins and tamboured stars.

One of the things I loved about these is that they were comfortable. My last competition costume involved 6″ heels (a necessity in order to be true to Guillermo’s vision of Lucille Sharpe), and nerve damage happened (also something far too many competitive costumers are familiar with), so making comfortable footwear was a priority.  But, the embellishments never pleased me all that much – I didn’t really plan out my design and hastily did it in the eleventh hour before con. I knew that these were going to be completely remade for the Crown Championships.

I pretty much went through the same process the second time around making these shoes, but I referred to my friend Casey’s blog post on making her own shoes for her Anne Boleyn costume (my friends also like to costume themselves as dead queens). I used her approach, since the interiors of her shoes were a lot cleaner than the ones I had previously made and that was one of the big things I wanted to improve upon. I made a whole pair, again, that I did not use (I guess theoretically I’ve amassed myself a great collection of shiny house shoes), because I struggled again with getting the pointed toe right. Lots of nipping and tucking for days – trying to fit shoe patterns on your own fit is weird – and I finally settled on something I was happy with. The final new product was simple but well-made. The interior sole actually looks like a real shoe sole which makes me happy. I pad stitched so that there would be a little bit of grip in there. I completed all of the hand embroidering and beading before I sewed the shoes together. All of the stars, like the ones on my dress, are tamboured by hand. No store bought appliques.

The design was a lot more intricate this time around. They’re incredibly tacky, to be sure, but that is what a 1930s star-themed faux-rococo costume is supposed to be. I love them. My happy moment was when someone backstage at the Crown Championships told me I had Cinderella shoes. Yes!


But hey they look like actual shoes

I completely forgot to mention my shoes during my five minute pre-judging, and while I’m sure they were seen, I was really disappointed that I didn’t have time to talk about them and have them seen close up. I spent so much time on these, and as with the rest of the costume, whenever you spend so much time hand embroidering something, there is a piece of your soul left in it. But I did make sure I kicked up my skirts to show my ankles on stage during the main show. I enjoy living scandalously.



Belle Cosplay // Live Action Beauty and the Beast



This costume is actually several months old and I’ve worn it several times at this point, but since I’m catching up on updating this blog I am only just now getting around to sharing it.

I’ve been wanting to make a Belle costume ever since I fell down the cosplay rabbit hole, so when the promos for live-action film came out in early spring 2017 and I saw the costumes by Jacqueline Durran, I knew immediately that this was the version of Belle I would be making. I love the traditional cartoon version of her costume as well and one day hope to make it, but the live action version had such beautiful colors and I have a soft spot for beautifully printed fabrics. (it should come as no surprise to anyone that I also own a collection of vintage dirndls)  I wasn’t so concerned with everything being exactly screen accurate, since the film hadn’t actually come out yet at that point. I would imagine by now you can probably find more accurate prints on Spoonflower these days, but considering I found everything for under $30 at a local fabric remnants store, I’m happy with what I have.

The dress is comprised of the overskirt and bodice, both made from blue linen, a petticoat, a red stomacher, a chemise, and a corset. The petticoat is constructed a bit oddly, in keeping with the source material. The top part is made from the same dark blue chintz that I used on the front of the bodice, and is fitted from the waist through to the hips, where the skirt is made from gathered white cotton. The bottom of the skirt has a wide band of grey and white seersucker.

I made the blue part from only four yards of linen, so I had to be really strategic in how I constructed everything so as to maximize the small amount of fabric I had to work with. The skirt is drop-waisted in order to reveal the chintz fabric on the upper part of the petticoat. There is white hand stitching around the waist. Since I didn’t have enough fabric for a wide turned up hem, I had to piece the underside of the skirt hem with grey and white striped seersucker that I had leftover from the petticoat. This has turned out to be one of my favorite parts of the costume, even though it is unseen.

The bodice is also constructed a little oddly. Historical costumers need to throw their ideals out of the window for this one.  It features a front part made of darker blue chintz and closes at the shoulders and the left side with lacing, which is basically red and white baker’s twine. I did hand bind the eyelets, a small but important detail. Underneath is pinned a red chintz stomacher, strategically asymmetrical.

While Emma Watson was vocal about refusing to wear a corset, I did opt to wear a corset, though I didn’t want to do with a rigid 18th century stay. Instead, I wore my trusty old Victorian corset that is lightly boned. The chemise isn’t screen accurate, since the sleeves aren’t gathered, but I had it leftover from my Outlander costume and it has worked fine with this costume.

The pockets at made from canvas and cotton ticking. I had seen a couple of other costumers who opted to handpaint the stripes onto their pockets, so that’s what I ended up doing for the blue striped pocket. (I can’t remember who it was now, but credits to them for their ingenuity) I decided to use ticking for the red one, since I liked the contrast of different stripes.

For a $30 costume that only took a week to build, it’s become my go-to costume and probably my most-worn of 2017.

(Just a side note, I am not accepting commissions from new clients at this time and I don’t sell my patterns)


Vanessa Ives / Penny Dreadful Cosplay



A couple of photos of my new Vanessa Ives inspired costume from Penny Dreadful. (inspired, because I wore this to a historical themed event and not a cosplay event, so I didn’t want to wear a black wig) I have already made her black walking suit, but have been really wanting to make one of her more elaborate lace shirtwaist blouses. I hadn’t planned on making this particular one, but on a whim I ordered some lace, dug up some black glass beads that I had leftover from my Lucille Sharpe costume, and set about patterning and sewing it up. I will be honest, I wasn’t sure if I could manage constructing such a detailed costume piece in such a short amount of time. The blouse involved some weird patterning. I made a simple darted blouse, then patterned out the silk chiffon cutout. The black part is made from black lace flatlined with black cotton. The sleeve also has a shorter lace overlay.

Placing the lace was the hardest part, since it required a lot of trimming, layering, and manipulation to achieve the look of Vanessa’s blouse in the show. I also used antique lace on the neck collar and the sleeve cuffs. The blouse is adorned in black glass beads, though I ran out of time so I would like to add more in the future. I made a wide black velveteen belt to go with it.

I wore the blouse with my 9-gored walking skirt, though I would love to replace it with a black taffeta skirt in the future. My 9-gore skirt has proven to be one of my most versatile costume pieces, and I have worn it with about five different costume variants at this point! One day I still want to do a tutorial on how to make it.


Geillis Duncan’s Gathering Dress from Outlander


geillis1aredGeillis Duncan’s white dress from Outlander has been on my to-do list for such a long time, but for some reason kept getting pushed to the side in favor of loftier projects throughout the past year. I’ve already made Claire and Jamie Fraser costumes, but Geillis is such a fun character and I’ve always loved the weird factor that she brings to the story.  It should be noted that I am not a strict historical costumer. I enjoy historical fashion and as an academic, I respect the educational work of historical reenactors, but as a cosplayer (or whatever term floats your boat), I prefer to recreate costumes as I see them on screen. I know a lot of Outlander costumers have chosen to make “historically accurate” versions of the show’s costumes, but screen accuracy and respect for the costume designs by Terry Dresbach are personally more important to me.

I had been hoping to find some more screen accurate fabrics, but after I found some pure natural colored linen at a discount fabric store for only $3, I decided now was the time. The arisaid (or plaid, depending on who you are talking to) and chemise were made from fabrics that I inherited from my grandmother. I had wanted to incorporate those fabrics into a costume, so despite not being perfectly accurate, they are meaningful to me at least. Between finding such a great deal on the linen and repurposing my grandmother’s fabrics, I only spent around $30 on this costume including all the notions and the brooch.

geillis2aredThis costume wasn’t particularly difficult to make. I already owned all of the appropriate 18th century undergarments (stays, bum roll, and several petticoats), except for a sheer chemise. I honestly am not crazy with how it turned out and will probably make some adjustments to it in the future. The fabric, while pretty (and again, part of my grandmother’s stash), was a sheer synthetic that wanted to just shred itself at the hands of my sewing machine needle. I did French seams, which helped tame things, but because the fabric was so slippery, it was fussy and ended up taking a lot more time than I had intended.

I created a separate bodice and skirt. For the bodice, I already had a hand drafted base pattern that I’ve used for Tudor era clothing. The shape is so similar, I just modified it to fit my 18th century stays and to include the extra seams on the front sides that are visible in the reference photos. The bodice is fully lined with hand sewn armholes. There is no boning in the bodice, since I have a solid set of stays.

Geillis’ dress laces up the back, and I used the “cheat” method of installing metal eyelets and just hand covering them with embroidery thread (not a time saving cheat by any stretch of the imagination, fyi, just a non-historical cheat). I did this because again, this is a cosplay and not a historical recreation. I intend for this costume to get a lot of wear to cons, renfaires, and photoshoots, so it was important to make everything so that it will be resilient and can endure everything from multiple washings to hikes through the woods. 😉

The skirt is nothing special, just three larges rectangles that I knife pleated into a waistband. I didn’t have tons of fabric to work with so it isn’t as voluminous as I normally would have liked, but with the bum roll and three petticoats it ended up looking like it had more volume than it did. Again, everything has French seams except for the back seam which I flat felled.

The arisaid is just a large piece of textured sheer white fabric (also from my grandmother’s stash) cut like a men’s great kilt. Geillis’ arisaid appears to be finished all around with a gold rolled hem. I had not time nor inclination to do this by hand, so I tried to do this with my serger and ended up failing miserably. Again, old synthetic fabric. It just shredded when the needle it hit and no matter how much I fiddled with the settings on my machine, the rolled hem just ended up looking like messy loops. It just wasn’t working and my photoshoot was in two days, so I just said screw this and pinked the edges. I actually love the look of pinked edges, so it worked out fine. Geillis’ arisaid has no real pleating or draping action going on (she appears to wear it like a toga with a twist halfway through), it just looks like it is gathered at the top (so I basically cartridge pleated one end) into the lover’s eye brooch at the shoulder on the front and just folded flat on the back.

geillis6redaThe lover’s eye brooch was interesting to make. I may do a tutorial eventually if I can will myself to make another one. Not particularly difficult, it was just a bit fussy and involved inadvertently breathing in more hot glue fumes that I should have. (mainly because glueing the pearls took about 5 times longer than I expected) The eye is taken from a portrait of Bonnie Prince Charlie (not sure if it’s the exact same one they used in the show, but it looks pretty darn close), and while I wish I could say that I meticulously painted the whole thing by hand, it’s a printed image. But for what it’s worth, I actually think it looks pretty good considering. The frame is made from stacked worbla and handpainted, and covered in pearls of two different sizes. All of the materials I used to make the brooch were leftover from other projects, so again, no additional cost!

The belt is just a cheap-o belt from Walmart. Geillis’ belt buckle is rhinestone encrusted, so the night before we did the photoshoot I popped on few rhinestones to bling it out more, but her belt also has some crescent shaped rhinestones (which I did not have on hand) so I will be adding those on later.

I took my time on this costume (I started it in October and finished it in December, but I completed three other costumes and attended several costuming events during that time period), but am glad to finally had added it to my repertoire. It’s been long overdue!


Victorian Hufflepuff Cosplay



This past weekend I was finally able to debut my new Victorian Hufflepuff costume. This costume was heavily inspired by a black walking suit worn by Eva Green in Penny Dreadful. While my original plan was to make the suit for my Victorian Hufflepuff Professor, I can and will be able to also use this suit for Vanessa Ives, Missy from Doctor Who, and even Mary Poppins. It would seem that costume designers really like the black Victorian walking suit. 😉

Below is my brief recap of the process. I doubt there is much to be learned from it other than my self-deprecation as a costumer, but perhaps breaking things down can help other people who are planning to make a similar type of costume.

The Coat


When I originally started this project, I was thinking that I could make it pretty quickly and that it wouldn’t be a bit deal. I wanted to keep it simple since I was coming off of the madness of making my Lucille Sharpe costume. It didn’t really turn out to be simple, unfortunately. In all honestly, this coat might actually have been one of the hardest things I have EVER patterned. (yes, this made patterning Thranduil’s coat seem easy peasy) The front part was easy enough, but the back part involved princess seams from shoulder to hem, and in the middle the notches for the deep pleats. Deep pleats that need to fall, not squarely, but in a perfect A-line shape. And that must line up perfectly when hemmed.

I think I had nightmares about this.

But it all worked out. After a full month of agonizing, working, agonizing, working to frustration, leaving it for a few days, and then repeating all over again.


Ironically, I think I was a little overly enthusiastic in my pleating, because they ended up being a little too dramatically poofy. After frantically panicking and nearly throwing the whole thing out the window, I decided to try sewing each pleat down about four inches. Duh. Crisis easily averted. But I’m still irritated that I screwed them up.

Other things I should have done differently: more interfacing. I tried to go about this project using everything I know about proper menswear tailoring (thanks to my nerd husband who has made period menswear). But despite interlining everything in canvas and interfacing the front inset and collar, I think I could have used more. The collar really doesn’t have the stiffness that I was seeking, so yeah, next time I’d do that differently. I feel like this coat is one of those things that I probably overthought. I probably could have done half as much work and it might have looked better, but overthinking is one of my shortfallings as a costumer.

The Skirt


The skirt is my late Victorian 9-gored skirt. Eventually, once I find enough of the right fabric, I am going to try to do a tutorial on how to make your own. It wasn’t particularly difficult, but there  was a ton of hand-hemming involved. I kept the hem nice and wide. I know that these skirts are often found totally lined, which makes a lot of sense, but quality lining is oftentimes more expensive than the fashion fabric itself. I saved the expensive lining for the coat instead and did French seams throughout to keep everything nice and tidy.

The Blouse


The blouse is self-patterned from muslin that I happened to have in my stash, and is loosely based off of one that I found while googling shirtwaists for some inspiration. It had a similar “V” design down the front in thin rick-rack. I had been throwing around different ideas on how to embellish the blouse, and the usual Victorian lace just didn’t seem right for a Hufflepuff professor. I feel like the Hufflepuff aesthetic is a little quirkier (I mean, we are the house that Tonks and Newt Scamander came out of) and for that reason rick-rack seemed spot-on. I went with medium-sized rick-rack (which is probably not historically accurate but…wizards) and went to town. The buttons are also not historically sound, but I had a whole lot of them leftover from another project so that’s what I used.

I meant to interline the puffed sleeves with some tulle to give them additional structure, but ran out of time (due to aforementioned coat), so that will be a future project.

This was my first time making a Victorian blouse like this, so I know it isn’t perfect and there are quite a few things I will do differently next time. But I don’t think it was too bad for a first.

Overall, I’m pleased with how the entire costume turned out, and while it wasn’t really on my “to-do list” for the upcoming year, I think I’ll probably wear it a fair bit. On to the next project!


Easy Drawstring Bag Tutorial



I am so excited to share my first little cosplay sewing tutorial with you! Carrying a handbag or backpack with your cosplay is, for most of us, a necessary evil. Conventions usually involve long days, and with that comes the need for water, snacks, badges, and makeup/costume touch-ups, among other things. Even if you are lucky enough to score a room in a host hotel, you still need to carry your badge, phone, ID, and other essentials. A simple drawstring bag is a discreet way to stow those essentials away without detracting from the look of your costume. You can make one to match your costume using leftover fabric, a simple black one, or even out of a cute nerdy print fabric. This tutorial is for a small bag (about 8×10 inches), but you can customize the size to suit your needs. I made mine big enough to hold a bottle of water, but you could make a littler one that is just big enough for your phone/badge/ID.

There are more advanced ways to go about making these, but this is intended to be a beginner level tutorial. I’ve tried to simplify things so that someone with almost no sewing experience could do this. No patterns needed!

  • *1/4 yard fashion fabric (this will be the exterior visible part of your bag, I chose my Hogwarts house colors – Hufflepuff pride!)
  • *1/4 yard lining fabric
  • 56″ inches of silky cording (you can buy packages of this in the jewelry section, or in the trims-by-the-yard at most craft stores)
  • Thread to match fabric
  • Fabric marking pencil
  • Seam Ripper
  • Safety pin
  • Pins
  • Fray Check


Estimated crafting time: 2 hrs // Skill Level: Beginner/Novice

*Note on fabrics: 1/4 yard is just a reference, but to be honest I’ve always made these with just the scraps I have laying around my studio! Also, for the lining, I recommend a heavyweight, slick lining fabric like taffeta. JoAnn’s sells a one that I love – I can’t remember the name but it’s usually about $9.99 a yard in their Special Occasion fabrics section.

To start, take your fashion fabric (if it is wrinkly, make sure it is ironed flat first!) and lay it flat on your cutting board. You will need 2 rectangles. Measure out your rectangle with your marking pencil (or you can eyeball it, easy to do if you have a rotary cutting board). You can make it any size you like, really, just remember that all of your pieces must be the same size. My pieces were 9″ x 11″ , and when finished my bag was about 8″ x 10″. Cut  two rectangles of this fabric.
Repeat this process for your lining fabric. You can use one of the first rectangles you cut as your “pattern”, if you like.

You should end up with four rectangles: two of your fashion fabric and two of your lining fabric.


Now comes the sewing bit. Take your two pieces of fashion fabric. Pin them together as pictured below, leaving the top part of the rectangle open. Then take your lining fabric. Pin them together as pictured, leaving the top part open as well as a 3″ inch opening on the lower side of the bag. It doesn’t have to be in an exact spot, just as long as you leave an opening. It may not make sense now, but once you sew everything together, this will be your only way to turn the bag right side out! Sew your pinned parts.


Once you’ve sewn these parts together, you will have two “pockets”, and your lining (the black one on my project) will have an opening.


Snip the bottom corners on both your lining and your fashion fabric. This will ensure that the corners of your bag look sharp and tidy when all is said and done.


Now press the sewn edges of both “pockets” as shown. Again, this is to ensure your seams are all crisp and sharp when the project is completed.


Next, take your lining pocket and turn it right side out. Your fashion fabric should still be inside out. Take the top opening of your lining pocket and the the top opening of your fashion fabric pocket and pin these together as pictured. The raw edges of both the lining and the fashion fabric should both be visible.



Sew this together.  It should look like this.



Turn your bag right side out. Straighten everything out. Go ahead and iron all of the seams flat, poking out the corners so they are nice and sharp.


Return to that little part of the lining we left open, and hand stitch the opening closed. You can do this however neatly you like, since no one will see it. The main thing is that you want to make sure it is closed up tightly – you don’t want your lipstick or your ID slipping through that opening and getting lost between the lining!


Next up, you are going mark both sides of your bag, at least 1″ inch from the top opening (you could go wider, it depends on how big of a ruffle you want at the top), as pictured. I just used tailor’s chalk for clarity and because my fabric was light-colored, but you can mark this with pins, too. Next, mark another line about 3/4″ (don’t go any narrower than this, you will have a lot of cord to thread through here!) of an inch below this line, as pictured. Sew along these lines around the entire perimeter of your bag. You now have two parallel lines. This is going to be the channel for your drawstring cord.


Now, carefully make two tiny snips each between your parallel lines by the seam line. Repeat on the other side of bag. You should have four snips. You can either finish these raw cuts but making a little buttonhole stitch by hand with embroidery thread, or if you are in a hurry (as I usually am), you can just dab some Fray Check on the raw cuts. (be careful with Fray Check if your fabric is thin – I accidentally used too much and it ended up seeping through the lining and staining my fashion fabric! woops!)


Now, take your first piece of cording, cord #1. You are going to thread this through the channel you made. I find it is easiest if I attach a safety pin to the end of the cord to help guide it through the channel. Bring cord #1 allll the way around, back to the notch next to where you started. Pull it out, and bring your two ends together and knot them. You can dab some fray check or melt your knot together with a hot tip to keep the knot from coming undone.


Starting on the OTHER side of the bag, repeat this. You will end up with loops on each side of your bag. You should be able to securely pull them open and closed with ease.


There you have it, you now have a handy little bag to match your cosplay! It is easy to adorn with lace, beads, or anything else you like to customize it and match to your cosplay. Be creative and make it yours! Since I need a cute little bag to go with a Victorian Hufflepuff costume I am making, I decided to embellish mine by handstitching some lace and beads on.


Thanks so much for reading this, I hope some of you found this helpful. If you found it useful, please feel free to let me know and share this link with your friends!


Con Survival for Cosplayers: Packing for Con


pack3Continuing my series of Con Survival for Cosplayers, today I will be covering that dreaded subject: Packing. (Part one is about your Cosplay Repair Kit)

Most cosplayers can relate to rushing to finish your costume before leaving for the con, only to realize that you still have to actually pack everything. Leading up to DragonCon this year, starting about a week out, I saw post after post on Facebook from people who cheerfully posted photos of their neat little R2D2 suitcases with the annoying caption “I’m all packed for DragonCon! Are you?”. Meanwhile, I was buried underneath 15 pounds of velvet, still handstitching linings, hems, and trims and couldn’t even begin to think about the daunting task of packing.

For non-cosplayers, packing for a convention is basically like packing for a normal trip, except with geeky t-shirts and alcohol. For cosplayers, however, we have to consider packing not only 10 times the amount of stuff that a normal, sane con-goer would pack, but we are also packing some of our most precious, valued, and fragile possessions.

I have been very fortunate because up till now, I have been able to drive to all of my favorite conventions. When I bought a new car this year, I upgraded from my tiny Honda Civic to a roomy SUV. Because cosplay. With that said, with a little planning (and Tetris-packing), I still managed to transport insane amounts of stuff with my tiny Honda.

Step 1: Make A Checklist

I’m a big fan of checklists. Start working on your checklist weeks out from the con. That way, you can pull it up whenever you think of something you need to add, and you aren’t being rushed to remember it all at once. This could be via a note on your phone, a paper notebook, or even a word document on your computer. I don’t simply write “Tauriel cosplay”. I make bullet points, itemizing every single item that I use for that costume, right down to any special makeup, prosthetics (and adhesives), hair accessories, and specific underwear that I need for that costume. Everything. It may seem tedious to include the most obvious things, but write it down anyway. All of it. Because the day before the con in the middle of a mad rush, you are going to forget. This is an example of a checklist I made from a past con.


On that vein, as you are making your list and as you find the time, take those items out of storage whenever you think about them. Start compiling those things in a bin. Spanx that go under that superhero costume? Wig caps that are buried in your makeup drawer? That very specific pair of lucky socks that you HAVE to wear with those boots? Yep, those things. Dig them out and set them aside. You will thank yourself when you are rushing to pack the night before con, because often those things are not obvious and you might not remember them till you’re at the hotel

Step 2: Choose Your Luggage

If you are travelling via car and are bringing more than one or two costumes, I recommend investing in a double-sized black plastic storage bin. These are like the plastic storage bins most cosplayers know and love (I also  recommend), but twice the size and with wheels and a pulley. These retail for anywhere between $25 and $50, depending on where you get them. I got mine from Wal-Mart for $25. This actually fit into the backseat of my two door Honda (with three normal sized tubs in the trunk).


Bellpeople at hotels always seem super appreciative of our streamlined luggage, since it can be tedious and time-consuming (which means loss of income/tips! ALWAYS tip your bellperson well) to safely load up lots of small items onto a cart. If you are rooming with other people, these can also help keep your stuff more consolidated and protect your costume from being sat on, people throwing their own stuff on top of it, having things spilled/body paint sprayed on it, etc by your roomies. 😉

Another luggage item that I absolutely cannot live without with I am driving to a con is my train case. (You can, of course, travel in style like Joan Holloway from Mad Men and use this as your carry-on when flying. Just remember than many makeup items are considered liquids/gels and you need to make sure everything is organized to be TSA compliant.)

My train case is vintage and similar ones can be found at antique stores and on etsy/ebay, but you can also get a professional makeup case, or get in touch with your inner 90’s kid with a Caboodles case. Just make sure you get one with a tray or some kind of layered organizing feature. I keep all of my hair and makeup supplies for ALL of my costumes as well as my toiletries in here. Mine used to have a mirror, but it broke so I keep a small makeup mirror in here too. Again, it keeps things neatly consolidated and protected both while you travel and in your hotel room, especially if you have roommates. It’s also easy to move around so you can do your makeup by the window or at a table in the room while the bathroom is freed up for other people to use.

Step 3: Protect Your Costumes While Traveling

That brings me to safely packing your costumes for transport. The most disheartening thing that can happen is to arrive at your hotel and open up your luggage only to find that your worbla has become misshapen/broken, a prop has gotten scuffed, or your dress has gotten a killer wrinkle down the front. Here are some tips to keep your costumes protected en route.

pack7For armor/fragile things: I collect those big plastic “bubbles” that come in shipping
boxes. These seem to be non-reactive with paint (as are anti-static dry-cleaner bags rolled up and stuffed into things), so they keep my armor pieces from sticking to or scratching each other. They also provide a little buffer in case of minor impact. If you are travelling by air, you can also wrap clothing items (leggings, t-shirts, etc) and layer them around your fragile things to protect them. There is no guarantee with air travel that nothing will break (always bring your repair kit!), but careful layering can reduce the chances of breakage.Some items do unfortunately just need to be carried by hand.

pack2Sewn Costumes and leather items: For sewn costume and leather items, stuffing them with either tissue paper or dry-cleaner bags helps protect the shape. My Tauriel boots, for example, have a lot of fragile detail work on them, so I stuff them with plastic bags to help keep their shape and retain the integrity of the detail work. Same can be said for certain types of bodices, etc that you don’t want to be crushed. Again, for air travel, you can use clothing items in place of tissue or bags.

Obviously this is not an exhaustive list, but this is what has worked well for me thus far. Hopefully some of these tips help you when thinking ahead to packing for your next convention! Do you have any tips that you’d love to share? Let me know in the comments below!

Costuming Plans for 2017


Happy first day of fall! For me, that means it’s time to buckle down and start making some firm decisions about new project plans. In keeping with post-DragonCon tradition, I usually jump right into deciding on and planning my costumes for the next year. I plan my entire year’s worth of costumes around DragonCon, with smaller cons throughout the year as marking points for achieving my goals. At least one of these will take the entire time between now and then to plan and undertake. So without further ado, here are the costumes I plan to spend the next 11 months working on.

Marie Antoinette (1938 version)


Image via Pinterest

The fashion historians can sneer all they like. This is 1930s perfection. I am planning to recreate this with as much screen accuracy as is humanly possible in 11 months and without 1930s fabrics (and sadly, probably not the champagne metallic silk that I am desperate for). The  is the one that will probably finish me. I might actually die. But I will die a glitterly, bedazzled death. And then become stardust.

Vanessa Ives, Penny Dreadful


Image via Pinterest

I needed to work in at least one creepy lady costume for 2017. I would wear any  of Vanessa’s outfits at any time really. To the grocery store, even. Any of it. I want it all. This is not her most iconic outfit, but it is by far my favorite. I’ve already gotten the fabric/lace for the blouse, so hopefully I can start work on this soon. Barring any issues,  I am planning to have this ready by February.

The Green Fairy, Moulin Rouge


Image via The Times

This was actually supposed to be a surprise costume for DragonCon 2016, but sadly the Moulin Rouge group I was supposed to be in didn’t quite come to fruition. Between that and all the work I had left to do on Lucille Sharpe, I decided to put the Green Fairy on the backburner. I do, however, have the fabric for this, in all it’s bright green glittering splendor, so it will happen! No idea where I will wear it! (uhm, Moulin Rouge for DragonCon 2017?? Who’s in?)

Saavik, Star Trek: Wrath of Khan

Again, Saavik was supposed to happen this year, but to be honest I never found the right fabric for the uniform. I know I’m being picky, but I feel that this uniform needs a very specific weight, texture, and color of fabric. I really, really want to do her justice and the I want to be faithful to the look and feel of the 1980s film. I bought all of her rank appropriate pins earlier this year, so at least I have a few things checked off of the materials list for this one.


Image via Pinterest

Well, there you have it. Hopefully you guys will stick with me over the next year as I embark on these new projects.

Con Survival for Cosplayers: Your Cosplay Repair Kit


To kickstart my new blog, I decided to do a series in which I cover Con Survival for Cosplayers. I will be posting a new segment in this series each week throughout the fall, covering everything from cosplay repair to healthy eating during your costumed excursions to conventions.

This week, we will be covering your cosplay repair kit. This is an absolutely vital thing for all cosplayers to carry with them to cons, whether you bring a large kit or just a couple of tools. However, in the rush of packing and finishing costumes, it’s often easy to forget some of the most vital necessities to keep on hand in case of a costume malfunction.

I always start packing my repair kit a week or two before the convention. I try to throw things in there as they pop into my mind. Even if I need to fish them back out before I leave for the con (like a glue gun), it helps to begin organizing all of my repair tools in the same place.


I use a craft tool box like this one to keep my supplies tidy and easily accessible when I’m travelling and in my hotel room. I actually inherited this one from my grandmother, but you can find similar ones at craft stores and or home improvement stores. I like this one because it is small enough to fit into most suitcase or bags that I bring to conventions, and keeps my supplies easily accessible.

Your checklist is going to vary somewhat based on your specific costumes, but I have found that the following items are useful for most of the costumes I have brought to conventions. (Note: most of my costumes are handsewn, so always bring sewing supplies, but I recommend bringing some of these even if your costume has store-bought clothing parts because things tear, buttons fall off, etc.)


  • Safety pins (organized into a mini-ziplock bag)
  • Small sewing scissors
  • Straight pins (for last minute hemming, etc)
  • Sewing Needles
  • THIMBLE (Because you WILL poke your fingers more when you are stressed and hurried)
  • Thread to match your costumes
  • Extra hooks/eyes/buttons
  • Glue gun
  • Extra glue sticks (just trust me when I say to always bring more than you think you will need)
  • Duct tape
  • Cello tape
  • Oil paint pens (for prop/armor/hardware touch ups, I use Testor’s)
  • Spare worbla (note: the hairdryer in your hotel room can help re-adhere small worbla bits in a pinch, no need to bring a heat gun)
  • E6000
  • Extra velcro

This list seems long, but usually I can fit all of these items into my toolbox (except duct tape) I know that packing this for airline travel may prove a little trickier and you may not have the luxury of bringing everything (also a consideration if you don’t have the luxury of staying in a hotel attached to the convention center and your particular con doesn’t have a cosplay repair area), but a lot of these items are very small and can also easily tucked into a purse or backpack for quick access on the go. Try to think about what items are the most important in case of a costume malfunction, and bring those. For me, that’s always been a needle, thread, small scissors, safety pins, and glue gun. Also helpful are items like extra ribbon/cording (particularly for those who wear corseted costumes) and extra elastic.


At the end of the day, always hope that you won’t need any of these things while you are at the con. But after spending months making your costume, it’d be awful to not be able to wear it, or only wear it a very short time, because something went wrong that you weren’t prepared to fix.

What are your go-to cosplay repair items to bring to cons?


How I found cosplay (or how cosplay found me)


Since this blog is about going to be about costuming and cosplay, I thought for my first post I could get into the reasons why I started making costumes.

My costuming journey actually began long before I ever attended my first convention or knew what the word “cosplay” meant. Growing up, I always took my Halloween costumes seriously. Really seriously. But it wasn’t till I was 16 years old that my friend and I decided to make costumes for the renaissance faire. I had absolutely no idea what I was doing. I had limited sewing skills and pretty much figured things out as I went along. That first costume was nothing to write home about, but it was a beginning. I went back to the drawing board and starting working on my next costume. I checked out all of the books in the library 16th-elizabethan-doubletpertaining to costume and historical costume. I made a proper set of 16th century stays, a chemise, bum roll, farthingale, and even a set of ruffs. I taught myself how to grade up a pattern out of Janet Arnold’s Patterns of Fashion, and made an Elizabethan doublet. Of course the sewing work was pretty messy, but I was hooked.

At university, I dabbled in making costumes for our student-led theatrical society, and went on to work on some student short films after graduating, but writing my Art History dissertation in theatrical costume and then later my Master’s thesis on historical fashion led to burnout, and I lost interest in costuming for a time while my passion for vintage clothing and sewing vintage reproduction  took precedence.

It wasn’t until DragonCon 2013 that I realized how much I missed costuming. It was my first DragonCon, and seeing so many elaborate, amazing costumes inspired me. I decided that I would going to make costumes for the following year. I knew that my first cosplay would be from Peter Jackson’s Tolkien universe, but I wasn’t sure which one to do yet. When The Hobbit: Desolation of Smaug came out that December, I knew immediately what I was going to make.

Tauriel perhaps is not the most popular character for some, but I loved seeing a female elf portrayed in a way that was feminine yet edgier. Her character design was daunting, but I worked hard for several months leading up to DragonCon, methodically trying to get every detail right. This costume was with me at a very difficult time in my life when I was going through both my own health crisis and as well as my grandmother’s terminal illness. My grandmother was a professional drapist and seamstress, so my sewing projects were a way for me to connect with her. I shared photos of my progress on Tauriel with her, and it was something that we could chat about to take her mind off of her illness.

That year (2014), I also handmade my Lady 5th Doctor costume, my husband’s Thranduil costume, and the 4th Doctor’s scarf. My first DragonCon cosplaying was such an incredible experience. I only wished that I had discovered cosplay sooner. I was addicted.

My Lady 5th Doctor and 1st version of Tauriel

Looking back at the last few years, I have made so many wonderful friends and met so many interesting people through my little cosplay world. When I first started cosplay, I thought that I would never compete. But by chance, I did end up competing, just to try it out and see what it was like. I had so much fun in that first contest (ConNooga, I believe) and met some of the nicest people. When you do a costume contest, you are put in a room (for what can sometimes be hours) with all of the people at the convention who love doing the same thing you do. Star Wars, Trekkies, Whovians, Disney, etc. No matter your fandom, you all come together over the same love for crafting a costume. The camaraderie, for me at least, usually outweighs any competitive weirdness. In fact, the majority of my costuming friends I have met through competitions.

Also, I love that cosplay can make someone’s day. When you are at a convention and someone connects to the character you are cosplaying and genuinely is excited that you are representing a favorite part of their fandom – that is amazing. Kids reactions, especially, are so much fun. My Professor McGonagall costume is not my most elaborate costume, but I absolutely love how excited kids get when they see it. Even though I am over 50 years younger than Maggie Smith and my variant is not screen accurate, they still know the character and are excited to see Professor McGonagall. That is just about the best feeling.

I look forward to continuing my journey in this crazy little cosplay world and growing my skills as well as sharing them. Feel free to chime in below with your own reasons for beginning cosplay!